Compared with traditional lasers, fiber laser cutting machine manufacturers
The repeat positioning accuracy of industrial robots of fiber laser cutting machine manufacturers is slightly lower than that of five-axis machine tools, about ±100pm, but this can fully meet the accuracy requirements of the automotive sheet metal panel and chassis industries; the use of industrial robots greatly reduces The cost of the system reduces the cost of power consumption and system operation and maintenance, and reduces the footprint of the system. Second, compared with traditional lasers, fiber lasers have better cutting quality, lower system cost, longer service life, lower maintenance costs, and lower power consumption. The key is that the laser of the fiber laser can be transmitted through the fiber, which is convenient to connect with the industrial robot and realize flexible processing. Third, the defect of this system is that it can only process metal workpieces and cannot process non-metallic workpieces.): Fiber laser cutting machine supplier index parameter index parameter system power consumption 8KW air blowing cost 6 yuan/hour (in order to use pure Oxygen-assisted cutting of carbon steel within 2MM as an example) sporadic consumables 0.5/hour (water-cooled filter element, cutting head nozzle and lens) laser 00W/300W/400W/500W/1000W cutting speed 0-15/min (according to the power size and workpiece material With adjustable thickness) laser wavelength 1064NM working area 5M 1.6~3m hemispherical working area + mobile worktable 2M) cutting head focal length 57 inches (optional according to the thickness of the workpiece) repeated positioning accuracy ± 0.1MM power supply three-phase AC 380V power consumption 8KW Cooling method Air cooling/water cooling (depending on the power of the optional laser) Manipulator protection level IP65 System service life 100,000 hours System warranty 2 years Performance parameters Power consumption: System power consumption: 8KW According to the optional laser power The size varies. Sporadic consumables: 0.5 yuan/hour, including the filter element of the high-power laser water cooling system, cutting head air nozzle and cutting head protection lens. Blowing cost: 6 yuan/hour, using pure oxygen to assist cutting 2MM carbon steel as an example. Performance indicators ：Laser power: 200W/300W/400W/500W/1000 According to the material and thickness of the workpiece, the laser wavelength can be selected: 1070NM Working area: a hemispherical working area with a radius of 2 meters can be equipped with a manipulator with a radius of 2 meters. Cutting speed: 0-18 meters /Min Adjustable power supply: three-phase AC 380V power supply: 8KW according to the power of the optional laser cooling method: air cooling/water cooling according to the power of the optional laser cutting head focal length: 5-7 inches can be selected according to the thickness of the workpiece. Repeat positioning accuracy of the manipulator: ±0.05MM Manipulator protection level: IP65 System service life: 100,000 hours System warranty: 2 years 1 Advantages of the three-dimensional cutting system ±10Dum. , The cutting speed is fast, twice that of similar products.
The second manufacturer of fiber laser cutting machine has high cutting precision. The repeat positioning accuracy of the system is as high as the third, can cut o2mm small circles, the cutting effect is sleek and beautiful, and there is no visual deformation and burrs. The cutting time of a single small circle can be controlled within 2s. Fourth, the optional manipulator with an arm length of 2.01m can not only realize a hemispherical three-dimensional processing area with a diameter of 3m, but also realize a two-dimensional plane cutting of 3m*1.5m. Fifth, offline programming software can be selected according to actual needs, which can read digital models in 3D software export formats such as UG and Solid Work, and directly generate cutting trajectories after modification, instead of manual teaching, which is simple and easy to use.
This article is published by the original