Chain guide for fiber laser cutting machine

The chain guide rail for fiber laser cutting machine belongs to the transmission assembly technology platform. A chain guide rail for an optical fiber laser cutting machine includes a guide rail shell and a guide rail body. The guide rail shell is provided with a large number of constant holes, the guide rail body is provided with a large number of second constant holes, and the guide rail housing is provided with a large number of constant holes. A mounting groove is provided, the guide rail body can be put into the mounting groove on the guide rail housing, the invariable hole on the guide rail housing and the second invariant hole on the guide rail body undergo the invariable bolts and the constant lasting, the guide rail The casing and the non-variable plate are constant, and the non-variable plate is provided with a placement hole; this is applicable to the new type of experience guide rail housing and the guide rail body undergo constant bolts to stay in the same way, preventing the guide rail body from moving in the guide rail body. Signs of displacement caused by slippage are produced.

The rubber fiber laser cutting machine includes a base, a side plate, and a support plate. The support plate experiences the side plate unchanged at the upper end of the base, and the middle part of the support plate experiences The tube frame does not have a laser tube, the upper end of the tube frame is equipped with rollers on both sides, the tube frame is placed on the upper end of the support plate, and the second drive motor is arranged on the upper end of the support plate on the rear side of the tube frame, A second sprocket is arranged on the rotating shaft of the second driving motor, and the second sprocket continues through the sprocket with the same appearance of the chain and the pipe frame. This new type of experience is equipped with a drive wheel and a second drive wheel on the upper end of the base, which can move the rubber strip under the use of the drive wheel and the second drive wheel, and experience the external equipment to control its transmission rate and laser tube to board the second drive motor , It is more suitable for the rubber strip to be cut off quickly, and it is suitable for wide implementation and application.