Automatic fiber laser cutting machine to remove burrs from square sheet metal

Square sheet metal deburring automatic fiber laser cutting machine, the square sheet metal deburring automatic fiber laser cutting machine, including part-time table, iron plate, automatic fiber laser cutting machine, constant mechanism, conveyor negotiation slide mechanism. The automatic fiber laser cutting machine and the conveyor belt are all configured on the part-time table. The square sheet metal deburring automatic fiber laser cutting machine has undergone the mutual cooperation of the configured part-time table, iron plate, automatic fiber laser cutting machine, invariant mechanism, transportation mechanism, edging clearer and chute mechanism. Compared with the staff simply holding the sanding machine to polish the sheet metal, I found that a slide frame of similar size can be configured before the burr is removed. Polishing the cut surface and the edges on both sides. Greatly improve the application safety and part-time obedience of Kerr employees. Compared with other active or semi-active liquidation and assembly, this discovery has a lower manufacturing cost, and its repair and protection are more convenient.

The chuck transmission layout for the automatic fiber laser cutting machine includes a cavity, the cavity is connected to the sliding cavity on the rotating drum, and the pneumatic jaws slide Continuously in the sliding cavity, the adjusting rod is slidably inserted into the pneumatic claw, one end of the adjusting rod rolls synchronously with the rotating drum, the sealing screw is screwed on the pneumatic claw, and the sealing screw is connected with A spring is arranged between the adjusting rods. The chuck transmission layout of the automatic fiber laser cutting machine supplied by this discovery uses the cavity to supply air to all the sliding cavities, so that the trachea simply continues the sliding cavity, and the trachea connected to the cavity will not be affected The rolling of the drum. After adjusting the position of the sealing screw, the use of the spring on the pneumatic jaw is adjusted, and the difference in the use of the spring on the pneumatic jaw is used to cancel the pneumatic jaw and the rotating drum and sliding The difference in the conflicting force of the cavity ensures that the movement intervals of all the pneumatic jaws under similar air pressure are similar.