Automatic fiber laser cutting machine to improve the beam structure based on PLC control system
A fully automatic fiber laser cutting machine based on PLC control system to improve the beam layout. It includes a base and a bed, as well as drag chains, supporting saw teeth, beam layout, cutting head components and feeding balls, and the front and back of the bed are one-sided Don’t have feeding balls and drag chains. The drag chains continue to hold saw teeth. The beam layout is placed in the middle of the bed. The beam layout is provided with a slide rail. The cutting head assembly continues to slide on the slide rail after the bottom slider slides. The control table, the control table has a continuous arm connected to the bed, the control table includes performance assembly, manipulation assembly and control systems. The control system adopts the PLC control system. The continuous arm used to control the table and the bed accepts the movement arm and the bed The front and rear ends are also equipped with positioning sensors, which continue to the PLC control system, and the inner edge of the bed is equipped with electromagnets.
A full-automatic fiber laser cutting machine for plate and tube based on PLC system, including machine tool and part-time cutting table. Above the part-time cutting table, there is a horizontal beam layout. Equipped with a laser cutting head, one side of the machine tool is equipped with a welded steel pipe frame, one end of the welded steel pipe frame is equipped with an intersecting line drive system, and the other end is equipped with a chuck set as the front chuck. On the rack, the central position of the welded steel pipe rack is equipped with an adjustable reducing tug, and the welded steel pipe rack is also equipped with a clear drag chain, and it also contains a laser production box. The laser production box is equipped with a laser generator and electronics. The controller, the laser production device continues to the laser cutting head, and also includes a control table, which includes performance assembly, manipulation assembly and control system, and the control system adopts the PLC control system.
This article was published by the original