Automatic fiber laser cutting machine steel with automatic flip structure

Automatic steel fiber laser cutting machine with active flip layout, including the main body of the automatic fiber laser cutting machine and the feeding turn-up color structure arranged on the front side of the automatic fiber laser cutting machine body; the feeding turn-up color structure includes the feeding carrying mechanism And the flip support mechanism arranged at the bottom of the feed carrying mechanism; the flip support mechanism includes a flip support base and a flip support plate hinged on the top of the flip support base. Two adjustment plug-ins are installed symmetrically on both ends of the top of the flip support base, and the adjustment plugs are placed outside There is a compression spring, and a toggle continuous piece is arranged at the outer end of the adjustment plug-in. This new type of experience reversible layout plan can not only support the support at the feeding end of the automatic fiber laser cutting machine, but also avoid the problem of placing the parts to be cut when the part is large, and it can also be held when the cutting machine is idle. The mechanism is turned over, freeing up some walking application space in front of the cutting machine, and spared the inconvenience of usually part-time jobs.

An automatic fiber laser cutting machine for manufacturing transformer bases, including a body and legs. The length of the body is biased to one side and the upper end is provided with a processing box, and the processing box has an inner cavity The middle side is vertically provided with a partition, and the partition divides the inner cavity of the processing box into a processing cavity, and a screw rod is arranged on the middle side of the upper end of the machine body and along its length. The upper end of the machine body is provided with a screw rod. There is a processing table, a second screw rod is arranged on the middle side of the top end of the processing cavity, and a third screw rod and a fourth screw rod are arranged in parallel and vertically on the rear side of the inner end of the processing cavity. The lower end of the second screw rod There is a lifting and lowering cylinder, the end of the vertically upward piston rod of the lifting and lowering cylinder is provided with a laser cutting head, the third screw rod is continuously provided with a dust suction cover, and the fourth screw rod is provided with a spray nozzle. Water head, the lower end of the machine body is provided with a dust collecting box and a water collecting box.