Automatic fiber laser cutting machine rolling serration
A rolling sawtooth full-automatic fiber laser cutting machine, including a part-time table, the top of the part-time table continues to slide with a sliding seat, and the sliding seat continues to have active baldness, the part-time table is concave, and the top of the part-time table The concave side of the wall continuously rolls with a plurality of parallel transmission shafts. The new layout of this application is simple, start the servo motor, under the use of servo motor, sprocket and chain, the transmission shaft mobilizes the transmission gear to roll, the transmission gear meshes with the rack, mobilizes the sawtooth bed board to move, the sawtooth bed board slides to the edge of the part-time table , Facilitate the loading of processed parts. After loading with processed parts, the servo motor rolls in reverse to mobilize the serrated bed board to move to the processing area to facilitate processing. At the same time, the mutual use between the U-shaped limit rod and the limit wheel limits the serrated bed board Sliding along the axial direction of the drive shaft spared the serrated bed board and the part-time table.
A bed layout of an automatic fiber laser cutting machine, which includes a bed body and a dust extraction and exhaust system. The dust extraction and exhaust system is configured in the bed body. Including the side plate, the second side plate and the geometric block separating plate. Compared with the second side plate, the side plate is arranged on both sides of the main body of the bed. The geometric block separating plate is unchanged and placed between the side plate and the second side plate, and The separate board and the side board and the second side board enclose at least one part-time area, and the dust extraction and exhaust system is configured in the part-time area. This discovery also provides a bed shaping technique for a fully automatic fiber laser cutting machine. Compared with the existing technology, the overall layout of this discovery is more consolidated, with good rigidity, high precision, never deformed in application, and excellent ventilation results, so as to achieve the goal of improving product accuracy and reducing defect rate.
This article was published by the original