Automatic fiber laser cutting machine metal substrate
Automatic fiber laser cutting machine for metal substrates, including a frame. The frame is equipped with a bald head. The frame is equipped with a driving mechanism that is effective for driving the bald head and a second drive for driving the bald head. The third drive mechanism is used to drive the height of the bald head. The frame is equipped with a base with upper teeth and a cavity inside. The frame on the outside of the upper edge of the base is placed on the frame to be effective for pressing and cutting. The bottom of the cavity is equipped with a thimble mechanism that effectively supports the substrate to be cut. The bottom of the cavity is equipped with a geometric array of slag discharge holes, which are located in the rack below the slag hole It is equipped with a suction box, the bottom of the suction box is equipped with a receiving drawer, and the back of the suction box is equipped with an air outlet; this new model can improve the accuracy of the automatic fiber laser cutting machine when cutting the metal substrate, and can reduce the metal substrate The occurrence of burrs can also reduce the extravagance of the material.
Automatic ceramic fiber laser cutting machine, including main control unit, touch display screen, video head module, sliding rod, second sliding rod, bracket, base and laser emission module; among them , The base is located directly below the main control unit, the video head module is configured on the main control unit, and the touch display screen is continuous with the main control unit; one end of the bracket is continuous with the main control unit, the other end is continuous with the base, and the second slide The rod does not remain on the bracket and is arranged perpendicular to the bracket; the sliding rod is continuous with the second sliding rod and is perpendicular to the second sliding rod, and the sliding rod can move along the second sliding rod; the laser emission module is arranged under the sliding rod and can be Move along the sliding rod; when the ceramic tile is cut, the master control unit masters the laser emission module to cut according to the cutting diagram of the touch display screen. Using laser to illuminate the tiles, the cutting quality is high, and the cutting does not require the staff to touch the tiles, which greatly improves the safety of operation.
The new type reveals the control panel of the automatic fiber laser cutting machine, including the panel body arranged on the front side of the rack, the tray is arranged on the front side of the panel body, and the front side of the panel body The upper part of the tray is equipped with a groove for the tray to be inserted after the tray is rolled up. The two-sided division at the lower end of the tray is hinged with the double-sided inner wall of the lower part of the groove. The keyboard is arranged in the tray, and the upper end of the tray is equipped with The exposed through hole of the button; after adopting the above layout, the tray inside it can be folded and hidden in the panel body when it is not in use. In this way, the tray can be spared from obstructing the operator.