Automatic fiber laser cutting machine manufacturer's cutting system performance indicators

Automatic fiber laser cutting machine manufacturers have small inertia and fast acceleration. The CAD/CAM software programming of the CNC system is time-saving, convenient and the overall efficiency is high. The laser has a high degree of automation, can be completely enclosed for processing, has no pollution, and has low noise, which greatly improves the working environment of the operator. Some large-scale manufacturers took the lead in introducing advanced foreign five-axis laser cutting machines, which greatly improved the process effect and increased production efficiency. Because five-axis machine tools are basically imported from abroad at present, the price is extremely expensive, and the equipment price of more than three to five million yuan is a threshold that is difficult to popularize for the majority of small and medium-sized manufacturers. Moreover, for the current three to four million low-end five-axis laser cutting machines, the selected lasers are basically 2KW fast axial flow CO2 lasers, which need to be filled with He, Ne, CO2 and other gases, and the charge is 20 yuan/hour The power consumption of the system is about 30KW, plus the oxygen cost for auxiliary cutting and sporadic consumables, the accumulated hourly usage cost is as high as about 80 yuan. The system including cooling and charging covers an area of u200bu200bup to tens of square meters. The picture shows the working site of an imported five-axis laser machine tool.

Fully automatic fiber laser cutting machine manufacturer 3D laser manipulator cutting system performance indicators: laser power: 300W/400W/500W laser wavelength: 1064NM system service life: >100,000 hours Adjustable thickness) Working area: Hemispherical working area with a radius of 2.05 meters. Repeated positioning accuracy of the manipulator: ±Cutting speed: 0-12 m/min (according to the power and the simple operation process of the sheet material laser cutting machine. Turn on: (Open the gas cylinder first) Air valve) Turn on the air switch, emergency stop, and key switch (see whether the temperature of the water tank has an alarm display) 1. Turn on the computer, and turn on the computer after the computer is fully started (Note: the computer and the start cannot be turned on at the same time) 2: Press the start button to see the display The screen displays P, press the option to ON, then confirm (wait 90 seconds) 3: Then turn on the motor, enable, follow, laser, red light, each button in turn. Shut down: turn off the computer first, turn off the motor, enable, laser again , Red light, button, press the button, the display will display OFF, confirm, wait until P appears, press the stop button again, turn off the key switch (control the water tank), press the emergency stop, turn off the air switch, and turn off the air valve. Ready to process: import CAD drawing 1 Full screen-optimization-compensation (generally 0.2 in the parameter setting, and the compensation amount in the layer can be adjusted)-automatically add the lead (make the lead lengthening in the editor) and locate (1: mouse position 2: laser head position) one side Inspect one simulated processing one set working parameters, cutting speed, initial processing speed, delay 3 tracking delay 4 burn through delay 5 blowing (gas setting) one editing energy (current, frequency, pulse width) one click blowing 1 and blow 2 to see if there is any gas in formal processing. Adjust the focus and adjust the parameters 100, 0.3, 1 to move the cutting head to the edge of the plate. Turn off the enable button and remove the copper nozzle. When the copper cap is turned on, the laser is placed and the blade is placed. Manually rotate the plate to adjust the laser head to the position where the laser head emits larger sparks (moving the blade back and forth during debugging to prevent excitation). Turn off the laser, screw on the copper cap, and put the art blade on the plate to cut the copper nozzle to see the cutting If the distance between the copper nozzle and the blade is larger or smaller than 0.8mm, loosen the anti-fixation, rotate the cutting head, turn clockwise to lower, counterclockwise to rise, and then turn it to 0.8mm, then tighten it again, adjust the center Adjust the parameter 100.0.3, 1 paste the transparent tape under the copper mouth.

This article is published by the original