Automatic fiber laser cutting machine laser
A full-automatic fiber laser cutting machine laser, including a base and a supporting column. The upper appearance of the base does not change and there is a constant box, and the top appearance of the constant box does not change. There is a bearing on the side unchanged, the inner behavior of the bearing continues to have a screw rod, the rib on the screw rod continues to have a nut block, the end of the screw rod close to the nut block continues to have a second bearing, and the bottom end of the screw rod continues to have an adjustment knob. One end of the constant block away from the bearing is constant and continuously has a third bearing. This automatic fiber laser cutting machine laser, through the configuration of laser cutting assembly, using the laser probe and focusing lens, can continue to view the processed workpiece for cutting, the cutting obedience is high, the task intensity of the part-time staff is reduced, and the overall part-time results are improved. The fan and dust collection box ensure the application results of the laser of this automatic fiber laser cutting machine.
A fully-closed interchangeable full-automatic fiber laser cutting machine, including a cutting machine closing shell, the high and low side walls of the cutting machine closing shell are divided and connected with a top tube and The bottom tube, one end of the top tube and the bottom tube undergoes a first continuous recovery connection, and the adjacent two sets of bottom tubes undergo a second continuous recovery connection. The cutting machine closes the side wall of the housing and continues to suck. A wind motor, one end of the suction motor is clamped with a filter element, the top of the filter element does not have a top plate, and the upper appearance of the top plate is equipped with a card slot and a lifting handle. The joint operation between the bottom pipes can suck out all the useless gas according to the density difference of the useless gas. The joint operation between the filter element and the suction pipe can facilitate the dense filtration of the useless gas, and the pull handle and the filter element The cooperation between the two can facilitate the removal and replacement of the filter element and regular flushing.
This article was published by the original