Automatic fiber laser cutting machine for cold steel pipe processing

A full-automatic fiber laser cutting machine for intercooled steel pipe processing, including a bottom plate, both sides of the top of the bottom plate are unchanged and continuously have hydraulic telescopic rods, and the top of the hydraulic telescopic rod is unchanged and continuously have a chute plate There are slides on both sides of the slide groove plate, and the top of the slide plate does not change, there is a support plate, and the side of the top of the support plate does not change, there is a motor, which affects the steel pipe processing technology platform. This automatic fiber laser cutting machine for intercooling steel pipe processing can move the body of the automatic fiber laser cutting machine most conveniently. When the steel pipe needs to be cut into a bevel, it can cut the steel pipe non-vertically, which is a great improvement. In order to improve the cutting precision and facilitate the application of the operator, it can process the right and wrong steel pipes, which makes the assembly suitable for the widest range. When the steel pipe is processed, the steel pipe is very well fixed and flipped to ensure the cutting part-time job. Is usually held.

A full-automatic fiber laser cutting machine with integrated plate and tube, including a machine tool and a part-time cutting table. Above the part-time cutting table, there is a horizontal beam layout, and the beam layout is configured with laser cutting. Head, one side of the machine tool is equipped with a welded steel pipe frame, one end of the welded steel pipe frame is equipped with an intersecting line drive system, and the other end is equipped with a chuck set as the front chuck. The cut steel pipe is protected on the welded steel pipe frame. The central position of the steel tube rack is equipped with an adjustable diameter reducing tug, and the welded steel tube rack is also equipped with a clear drag chain, and it also contains a laser production box. The laser production box is equipped with a laser production device and an electronic controller. The production machine continues to the laser cutting head, which is suitable for the new type to enable the plate and pipe fittings to be processed on a unified cutting machine, which improves part-time compliance.

This article was published by the original