Adaptive focusing cutting head for automatic fiber laser cutting machine
A self-compliant focusing cutting head for full-automatic fiber laser cutting machine, comprising a cutting head body and an adjusting base. The cutting head body contains a cutting nozzle. Among them, there is a geometric fine-tuning assembly between the adjusting base and the cutting nozzle. The fine-tuning assembly can be used to fine-tune the position of the cutting nozzle. The fine-tuning assembly includes the adjustment mechanism connected to the drive mechanism. The drive mechanism is placed in the corresponding placement box on the lower end of the adjusting seat, and the adjusting mechanism is configured in the adjusting seat. Between the inner wall of the cutting nozzle and the outer wall of the cutting nozzle. The automatic fiber laser cutting machine supplied by this discovery uses a self-compliant focusing cutting head. Because it is equipped with a fine-tuning assembly, this discovery can be used to fine-tune the position of the cutting nozzle without manual operation during the application process, and makes the cutting The position of the mouth is doubly accurate.
A new type full-protection plate and tube dual-purpose automatic fiber laser cutting machine, including a cutting machine body, the cutting machine body is provided with a cutting track, and the cutting track A laser cutting head is arranged on the upper side, a control box is provided on one side of the cutting machine body, and the control box is continuously electrically controlled with the laser cutting head. There are geometric control buttons on the control box, and the cutting There is a part-time station on one side of the machine body, the top of the part-time station is provided with a groove, and the bottom end of the groove wall touches the board part-time station and the supervisor part-time station, the board part-time station and the supervisor part-time station Arrangement grooves are opened on the top. Favorable result: The guard plate is thus mobilized to flip, and the guard plate is equipped to prevent the sparks that occur during part-time jobs from splashing on the person, which may cause danger. After the second movement block slides on the second I-shaped rod, the second member is mobilized. The iron block on the second movement block is very attracted to the iron absorption stone, so that it does not hold the guard plate.
A full-automatic fiber laser cutting machine with active material distribution, along the feeding path of the clamping chuck, the abutment and the second abutment are arranged with the table slantingly inserted. The abutment and the second abutment are equipped with collecting troughs along the lower side of the width deflection of the platform. The inside of the abutment is a waste cavity and the table has a cavity opening. The edge of the cavity is continuously rolling and there is a distribution plate. The waste cavity is placed effectively for rolling The driving unit a of the feeder cage cover or the opening of the cavity, the second base is equipped with a support plate and the corresponding table has a through hole, and a drive support plate is also arranged between the support plate and the second base. The driving unit b that protrudes or sinks into the second abutment surface. Workpieces and wastes can be networked in the collecting trough to improve manufacturing compliance and effectively reduce the rate of defective parts.
This article was published by the original