a brief introduction to fabrication3
Like most other metals, stainless steel can also be manufactured and formed according to the desired design or shape.The equipment used to make other metals and stainless steel is usually the same and the only difference is the technology used in the manufacturing process.Stainless steel manufacturing can be used for industrial, commercial or purely decorative purposes.It has several different levels, each with unique features.This process is called plate manufacturing when stainless steel sheet is made.Since the stainless steel has a high rate of processing hardening, but it is plastic, several different manufacturing techniques can be accepted.Some metal manufacturing techniques commonly used on stainless steel include: cutting, cutting, bending, processing, welding, etc.However, at this point, it is important to note that the equipment used to make stainless steel needs to have greater power than the one used to make carbon steel.We will now simply clarify the techniques involved in stainless steel manufacturing: drafting and design: using specialized software to design various components so that accurate manufacturing techniques can be planned as needed.SolidWorks and other software are used for 3D design, while AutoCAD is used for 2D images.Cutting: The stainless steel needs to be cut into a suitable shape first.These shapes are called \"artifacts \".Traditional cutting techniques using plasma and waterLaser cutting is rapidly replacing jets.Cutting and saw cutting are two other common techniques used to cut the desired shape of the workpiece.Punch and punch: the process of creating a hole or punch using punch and punch techniques.Punching is a cost.Effective technology for manufacturing holes of different shapes and sizes in medium and large sheet metal manufacturing operations.Single or multiple holes can be created using punch, slot, punch and punch operations.Molding: at this stage, the workpiece is bent or rolled to change its physical size.Bending can be done using a folding machine or other folding machine.Hot rolling or cold rolling is carried out to bend sheet metal or tape.The metal changes its cross through a pair of rollersSegment size.Machining: Before the workpiece is connected together, this is one of the last stages of metal manufacturing.The processing process includes drilling, tapping and reverseBoring, turn to remove unwanted materials and provide the required properties for the workpiece.In the final stage of the stainless steel manufacturer, the workpiece is connected together using MIG or TIG welding or spot welding.This task needs to be done by certified welders who are familiar with the properties of various grades of stainless steel.Once the entire assembly is assembled, it can be powder coated, wet painted, galvanized or electrically sprayedPolish to extend its service life.
