What things need to be paid attention to when applying automatic fiber laser cutting machine processing and cutting

by:Lxshow     2021-05-24

The automatic fiber laser cutting machine of Taiqun Precision Machinery Co., Ltd. must be out of date when the spindle speed change during processing and cutting. The gears must be fully meshed when shifting. When excavating the machine tool is unusual, it is necessary to park immediately for inspection, adjust the tool before cutting, and clamp the object. The length of the clamping part shall not be less than 50mm. The parking baffle should remain unchanged, and the work can only be carried out after the test drive is carried out one after the other by clamping, unclamping, forward and backward.

When the machine tool is rolling, no part of the human body should touch the transmission parts. When manipulating, tie the cuffs and it is strictly forbidden to wear gloves. The head of the human body should deviate from the cutting direction, and the car must be parked in exchange for cutting tools, measuring workpieces, smoothing, and clearing the tube head. When cutting the tube head, beware of the tube head flying out and hurting people.

When the long material pipe is put into the material rack and the lead wire is loosened, it should be taken to prevent the pipe rolling, hitting, and crushing, and the grinding wheel automatic fiber laser cutting machine should be used. , Check in advance whether the grinding wheel is damaged, cracked, damp, and whether the power cord is reliable. The dust removal assembly of the automatic fiber laser cutting machine should be intact before cutting.

Should not stand alone when the work piece is biased. The method of upgrading is to adopt the replacement of some parts, components or articulation parts and articulation technology, so as to achieve the goal of replacing a unit, so that the original packaging machinery or manufacturing line's manufacturing capabilities, functions, compliance, models and assembly methods Wait for updates. In this way, the overlapping use of large-scale components and unit parts can not only improve the equipment cost, but also reduce the raw materials and a large number of tasks, and lower the cost.

Overview of the manipulating joints of the automatic fiber laser cutting machine

Machine cutting is automatically completed by the automatic fiber laser cutting machine, and the blade is adjusted according to the analysis book , Position the baffle, check the normal operation of the machine, and then put the quartz glass tube on the carrier to complete the active cutting. During the cutting process, water needs to be used to eliminate glass dust. The cut pipe needs to be pickled (hydrofluoric acid is adjusted to 5% concentration, the pipe is soaked for 3 minutes, and the pipe is taken out and rinsed with clean water) and then dried. Transfer to the next joint.

Manual cutting is done with a manual automatic fiber laser cutting machine, adjust the blade, position the baffle, wear a protective mask, and guard the layman. The cut is done The tube should be connected clean, then dried, and then transferred to the next joint. For manual cutting, please pay attention to the equal strength of both hands. Each component of force and cooperation should be in a unified plane. If the component of force is not in a unified plane, it will easily lead to a bevel.

Fully automatic fiber laser cutting machines are used in metal and non-metal industries. Generally speaking, the comparison of non-metal industries is detailed, such as stone cutting machines that cut stone, water Cutting machine, sawtooth cutting machine, cutting cloth and plastics, flame cutting machine is divided into two categories: CNC cutting machine and manual, manual type is available, small sports car, semi-active, pure manual, CNC type, gantry type CNC cutting machine, cantilever CNC cutting machine, desktop CNC cutting machine, intersecting line CNC cutting machine and so on.

Using the principle of gear differential feed, the tool is fed longitudinally on the high-speed torsion cutter head, thereby completing the new steel tube clamping immovability and the cutter head twisting cutting. idea. It has effectively solved the problems of high energy consumption, machine trembling, low cutting compliance, short tool life, low manufacturing homework rate, poor quality of steel pipe end faces, and inability to set length in the high-speed torsion processing method of steel pipes.

Machine cutting is done automatically using a fully automatic fiber laser cutting machine

Machine cutting is using fully automatic fiber laser cutting The machine automatically completes, adjust the blade according to the analysis book, position the baffle, check the normal operation of the machine, and then put the quartz glass tube on the carrier to complete the active cutting. During the cutting process, water should be used to eliminate glass dust, and the cut pipe needs to be pickled (hydrofluoric acid is adjusted to 5% concentration, the pipe is soaked for 3 minutes, and the pipe is taken out and rinsed with clean water) and then dried. Transfer to the next joint.

Manual cutting is done with a manual automatic fiber laser cutting machine, adjust the blade, position the baffle, wear a protective mask, and guard the layman. The cut is done. The tube should be connected clean, then dried, and then transferred to the next joint. For manual cutting, please pay attention to the equal strength of both hands. Each component of force and cooperation should be in a unified plane. If the component of force is not in a unified plane, it will easily lead to a bevel.

The principle is to experience the gas-push-oil-type mutual cooperation. The electrical system controls the action direction of the pneumatic system, and pushes the oil circuit to move in a straight line. The light signal detected by the board limit position is used as a basis for mastering and changing the air. Oil road action, so as to reach the expected path of knife.

The parameter list of the automatic fiber laser cutting machine is the construction of the CNC system based on the actual environment of the automatic fiber laser cutting machine by the automatic fiber laser cutting machine manufacturer. And mediation. The parameters of the automatic fiber laser cutting machine are the 'bridge' between the system and the automatic fiber laser cutting machine. It not only determines the construction and efficiency of the system, but also relates to the dynamic and static functions of the automatic fiber laser cutting machine. Therefore, the precision is also the important basis and reference for repairing the automatic fiber laser cutting machine.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...