Jinan Lingxiu Laser Equipment Co.,Ltd.
The automatic fiber laser cutting machine for small workpieces with multi-angle adjustment includes at least part-time fields, which are arranged to a certain degree. The upper appearance of the part-time fields is equipped with small parts, and the side of the small parts is equipped with a column, and the column remains unchanged. There are invariable blocks. The invariant block is equipped with a bracket. The bracket extends out the shovel arm. The cantilever end of the shovel arm is equipped with an invariant ring. The invariant ring is inserted with a rotating shaft. One end of the rotating shaft is equipped with a turntable on the turntable. Equipped with multiple perforations, the perforation is equipped with automatic fiber laser cutting heads, and the automatic fiber laser cutting heads are arranged in a circular array in the middle of the turntable. This applies to the new innovative type of automatic fiber laser cutting heads in the middle of the turntable. The annular array is arranged on the turntable, so that the automatic fiber laser cutting head can change the position at will in the degree of 360°, and make the cumbersome cutting into a simple cutting, so as to efficiently realize the cutting mission.
The automatic fiber laser cutting machine for manufacturing the placement code includes an assembly main body, the upper surface of the assembly main body is embedded with a receiving table, and the right side of the assembly main body is welded with Discharging port, the right side of the discharging port is provided with a storage cart, the upper surface of the receiving table is provided with a positioning groove, the inner side of the positioning groove is continuously provided with a pallet through the rotating shaft, and the lower surface of the pallet is provided There is a silo, and the silo is opened on the inner side of the holding table, the inner side of the holding table is provided with a holding block, the front end of the holding block is welded with a continuous shaft, and the front end of the continuous shaft passes through the holding block The appearance surface of the continuous shaft continues through the bearing and the holding table. This new type of application is convenient for the rapid network semi-product placement code, easy to quickly remove the semi-product placement code, and the drive shaft is mobilized to roll by turning the grip, so that the pallet rolls to eliminate the support for the pallet, so that the pallet is landed. The semi-finished product placement code can be dropped from the original material sheet.
This article was published by the original
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist