- Fiber laser cutting machine
- Laser marking machine
- Laser welding machine
- Laser cleaning machine
- Plasma cutting machine
- Vibrating knife cnc cutting machine
Precise correction mechanism of automatic fiber laser cutting machine
The new type reveals the strict automatic fiber laser cutting machine calibration mechanism, including the frame, the frame does not have a support plate, and the support plate has a continuous bearing plate that can be rolled. The support plate is equipped with a drive that is effective to drive the bearing plate to roll. There is a continuous support frame on the bearing plate that can be slid orbited, and a second drive mechanism that is effective to drive the support frame to slide is arranged on the bearing plate. Install the third drive mechanism that is effective to drive the second bearing plate to slide back and forth. The frame does not have a pair of brackets, and both brackets do not have a vision camera, the vision camera, the third drive mechanism, and the second drive mechanism. Negotiation drive ideas are consistent with the control of Teclast in the strict automatic fiber laser cutting machine; this new model can automatically modify the product arranged on the second carrier board, which has the advantages of convenient product calibration and high product calibration accuracy. the benefits of.
The new type reveals the compact layout of the automatic fiber laser cutting machine, including the rack. There are two parallel slide rails in the rack, between the two slide rails. Equipped with two sliding tables, the two ends of each sliding table continue to slide with one of the sliding rails. At least one cylinder is installed on each sliding table, and the piston rod of each cylinder remains unchanged. The cut substrate is pressed against the pressing block on the sliding table; after adopting the above layout, the sliding table in the pressing layout can move along the sliding rail. In this way, after the sliding table is moved on the sliding rail, The distance between the two sliding tables can be changed. In this way, the pressing block can complete the pressing of the substrates to be cut of different sizes.