Power of fiber laser cutting machine

The general closed-tube co2 laser of the fiber laser cutting machine can have a continuous output power of several tens of watts, which is far more than other gas lasers, and the lateral flow electrically excited co2 laser can have a continuous output power of hundreds of thousands of watts. Output. In addition, the lateral atmospheric pressure Co2 laser has reached a higher level in energy and power from the pulse output, which is comparable to solid-state lasers. The energy conversion efficiency of CO2 lasers can reach 30-40%, which also exceeds that of general gas lasers. It uses the transition between the vibration-rotational energy levels of the CO2 molecule, and it has a relatively rich spectrum. There are dozens of spectrum lines in the vicinity of 10 microns. The high-pressure co2 laser discovered in recent years can even achieve a continuously tunable output from 9 to 10 microns. Its output band happens to be the atmospheric window (that is, the transparency of the atmosphere to this wavelength is relatively high). In addition, it also has the advantages of high optical quality of the output beam, good coherence, narrow line width, and stable operation. Therefore, it has many applications in the national economy and national defense, such as processing (welding, cutting, drilling, etc.), communications, radar, chemical analysis, laser-induced chemical reactions, and surgical operations.

Fiber laser cutting machine high-power transverse excitation carbon dioxide laser, mainly used for laser welding, laser cutting, laser heat treatment, etc. It is widely used in the automobile industry, steel industry, shipbuilding industry, aviation industry, machinery industry, metallurgical industry, metal processing and motor manufacturing. After the handle is used to press the manipulator to automatically find the edge, the cutting head will automatically find the XY edge of the cut plate, and then automatically adjust the cutting angle to calibrate the plate. Press and walk the frame to check whether the direction is consistent with the figure. Whether it is out of the range of the plate. When replacing the gas, be sure to blow air first, press the start button to cut and return to the mechanical origin after the cutting is completed, press the man-machine interface of the material table to return to the machine's original position, and enter the next round of work. Turn off the power and air source once after the shift is completed.