Performance and basic parameters of automatic fiber laser cutting machine

Fully automatic fiber laser cutting machine uses high-energy laser source and control laser beam can effectively increase the processing speed and match the historical processing results. Ultraviolet laser cutting machine can cut the flexible circuit board and organic cover film in special density without special pressure and mold setting. The combined motion of the two-dimensional worktable of camera scanning and linear motor is adopted, which does not increase the processing difficulty due to the soft shape and the tortuous path; the MicroVeetor equipment uses a long-term description of the path of low light, which is smoother. Such a laser system cuts The contour edge of the diverticulum is neat and round, smooth, hairless, and free of glue. It is inevitable to open the window with horizontal tools and other machining methods. There will be punched burrs and police glue near the window. This kind of burr and elastic glue are inevitable. It is difficult to remove after bonding and pressing the upper pad, which will directly affect the subsequent plating quality. With MicroVector system dimensioning, this problem can be solved easily, because only Lei wants you to attach the revised CAD key piece AMicmnMentor's approval document, and then you can weave an easy and fast process to make a painful double cover. To achieve the purpose of processing from the surface.

The application of laser cutting technology of automatic fiber laser cutting machine in the advertising industry is mainly divided into two working methods: light cutting and engraving. For each In the way of working, we have some differences in the operation process. Laser engraving: It is mainly carried out on the cloud surface of the object, which is divided into two types: bitmap engraving and vector engraving: bitmap engraving: we first carry out the screen processing of the graphics we need to engrave in PIDTOSHP and convert it into a monochrome BMP format , Open the graphic file in the special low-light engraving and cutting software after the face. According to the material we are processing, we can set the appropriate parameters, and then the swallow will run, and the low-light engraving machine will engrave according to the dot matrix effect produced by the pain shape file. Vector engraving: use long-term software such as typographic design , And export the graphics to PLT, DXF, I format, marking machine, and then use the special laser cutting and engraving software to open the diagnosis graphics file, and send it to the laser engraving machine for processing. After the initial selection of the manufacturer, we determine the requirements. You can go to the market to find out or go to the counterparts who have bought the laser cutting machine to have a look at the performance and basic parameters of the machine. Choose several manufacturers with strong prices and preferential prices for early communication and proofing. Later, we can conduct on-site inspections and conduct more detailed discussions on the price of the machine, machine training, payment methods, and after-sales service. 3. The size of the laser power When choosing the performance of the laser cutting machine, we should fully consider our own environment. The size of the laser power is very important. For example, we often cut gold tail thin plates below 6mm, then we choose 500W-700W The laser cutting machine can meet the needs of production. If cutting materials above 6mm, we need to consider a machine with a higher power, which will greatly help the cost control of the enterprise.

This article is published by the original