New type induction laser cutting head for automatic fiber laser cutting machine

by:Lxshow     2021-05-16

A new type of laser cutting head for automatic fiber laser cutting machine. A gap sensor is arranged on the side of the cutting head of the automatic fiber laser cutting machine. The gap sensor is continuously controlled by the computer system. The gap sensor is arranged in the card slot on the side of the cutting head. Inside, the card slot undergoes the same screw at the side of the cutting head, the front end of the card slot is provided with a through hole, the tightening screw passes through the through hole to fasten the interval sensor, the upper part of the interval sensor is provided with a straight notch, and the bolt passes through the straight notch Keep the gap sensor on the side of the cutting head. The advantages of this new style are: it can be actively promoted or lowered according to the roughness of the plate, so that the interval between the cutting head and the plate is constant, so as to achieve better cutting results. At the same time, the distance sensor is not kept in the card slot to complete the portable placement of the distance sensor. The screws on the side and front end of the distance sensor can adjust the height of the sensor more conveniently and prevent the sensor from accidentally falling.

A 5-axis three-dimensional processing assembly for an automatic fiber laser cutting machine, including a three-dimensional processing assembly, the three-dimensional processing assembly includes a hollow torsion field and a second hollow torsion field And the third hollow torsion area, the edge of the torsion table in the hollow torsion area remains unchanged, the second hollow torsion area, the edge of the torsion table in the second hollow torsion area continues to the third hollow torsion area, and the torsion table in the third hollow torsion area The laser cutting head is placed on the bottom surface; the hollow torsion field experiences the L-shaped plate unchanged on the Z-axis sliding table; the 5-axis 3D processing assembly for the automatic fiber laser cutting machine can greatly reduce the manufacturing of the 5-axis 3D automatic fiber laser cutting machine The old-fashioned, 5-axis three-dimensional processing assembly is suitable for all laser cutting head manufacturing plants, and the placement is convenient, which is conducive to the large-scale application of the 5-axis three-dimensional automatic fiber laser cutting machine. It has a broad environment trend prospect and is worthy of vigorous implementation.

This article was published by the original

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...