Jinan Lingxiu Laser Equipment Co.,Ltd.
Maximum cutting pipe length
0~7000 (more than 3 meters need to be lengthened
Cutting pipe diameter
15~220 (the circumscribed circle of the workpiece)
50 (two chucks clamped together, workpiece length ≥
Pipe length: 4500~6100mm;
Pipe diameter D: suitable for pipe specifications: round
pipe, square pipe, rectangular pipe, profiles; feeding
size: 15mm≤circumcircle diameter≤220mm; (manual
placement is required);
Single pipe weight≤200kg; total load: ≤1000Kg;
X, Y axis positioning
X, Y axis repeat positioning
maximum operating speed
Maximum speed of chuck
Chuck Loading Weight
Total load 200
Host appearance (length,
width and height)
Bo Chu 5000/3000S
* * * *
The Machine Bed
The bed adopts a side-hanging structure and a one-piece welded bed, which is annealed to eliminate internal stress. After rough machining, vibration aging is performed before finishing machining, thereby greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The AC servo motor drive is controlled by the numerical control system, and the chuck realizes reciprocating motion in the Y direction after the motor drives, realizing rapid movement and feeding motion. Both the Y-axis rack and linear guide rail are made of high-precision products, which effectively guarantee the accuracy of the transmission; the limit switches at both ends of the stroke are controlled, and a hard limit device is installed at the same time, which effectively ensures the safety of the machine tool movement; the machine tool is equipped with The automatic lubricating device adds lubricating oil to the moving parts of the bed at regular intervals to ensure that the moving parts run in good condition, which can improve the service life of guide rails, gears and racks.
Front Feeding Device
The front feeding device includes a support plate controlled by an air cylinder, which supports the pipe when
the cut pipe is long and prevents it from sagging.
When the workpiece is being cut, the raised support cylinder supports the support plate to support the pipe
and prevents it from sagging. When the workpiece is cut, the raised support cylinders are all retracted, and the
workpiece falls to the blanking plate and slides to the storage place. The cylinder action is automatically
controlled by the system.
The front section is also divided into follow-up type and manual adjustment type.
There are 3 sets of follow-up support mechanisms installed on the bed, and each set of support is controlled by an independent servo motor to move up and down, mainly to carry out follow-up support for excessive deformation of long-cut pipes (pipes with small diameters). When the rear chuck moves to the corresponding position, the auxiliary support can be lowered for avoidance.
There are 3 sets of supporting mechanisms installed on the bed, and there are two types available:
1. The follow-up support is controlled by an independent servo motor to move up and down, mainly to carry out follow-up support for excessive deformation of long cut pipes (pipes with small diameters). When the rear chuck moves to the corresponding position, the auxiliary support can be lowered for avoidance.
2. The variable-diameter wheel support is lifted and lowered by the cylinder, and it can be manually adjusted to different scale positions to support pipes of
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist