Jinan Lingxiu Laser Equipment Co.,Ltd.
Automatic fiber laser cutting machine. Because the light-induced metal cutting and cutting machine will generate a certain amount of heat in the process of Liaoning, it needs to enter the chiller to cool down by water circulation. The chiller is also called optical fiber shimmer metal. Cutting machine chiller. Fiber laser metal cutting machine chiller is a kind of cooling water equipment that can provide constant temperature, constant flow and constant pressure. It is mainly composed of cooling water tank, circulating water system, refrigerating shrinkage machine, condenser, evaporator , Cooling fan, refrigeration controller and other components and related controllers. The working principle of the chiller of the optical fiber shimmer metal cutting machine: the cooling water in the chiller works through the circulating water pump in the evaporator of the equipment and compressor refrigeration system The heat generated during the operation of the equipment passes through the refrigeration cycle of the compressor refrigeration system and is finally transferred to the air. The corresponding controller can control the work of the compressor refrigeration system according to the set parameter requirements, so as to ensure the equipment The cooling water temperature is controlled within the specified range. Industry applications: Fiber laser metal cutting machines are widely used in metal processing, aviation, aerospace, electronics, electrical appliances, subway accessories, automobiles, food machinery, textile machinery, engineering machinery, precision Various manufacturing industries such as accessories, ships, metallurgical equipment, elevators, household appliances, craft gifts, tool processing, decoration, advertising, metal external processing, ear tool processing, etc. The appearance and component names of the cold water machine of the fiber optic metal group cutting machine , Daily inspection items of fiber laser cutting machine Chillers check the cold office unit base for regular maintenance to ensure that the machine is working in good condition. If you encounter any malfunctions, you should ask professional technicians for repairs. Do not disassemble the machine by yourself.
Pay attention to the following aspects in the daily maintenance seat of the automatic fiber laser cutting machine chiller: a) Regularly clean the heat sink, the cleaning method is: use a brush to put the heat sink on the steel carefully Then use the pressure box air to blow it clean. b) Regularly clean the condenser. c) Regularly check the water level in the water tank of the chiller. If the water level is too low, add pure water or deionized water in time. d) Regularly check the electrical wiring terminals and remove dust. e) Regularly check whether the joints in the waterway system are leaking, and the pipeline is aging. If there is water leakage, the relevant components should be replaced in time. f) Regularly check the water quality in the water tank of the chiller, if the cooling water quality becomes poor, turbid, and transparent When it falls, it is necessary to promptly drain all the used cooling water and replace with new cooling water. Clean the impurities on the filter core regularly. If the cell core is damaged, it should be replaced in time. The replaced leak core must use the standard filter element required by the manufacturer. Optical system inspection and cleaning a) Note 1) Optical lens (reflective mounting , Focusing lens, etc.). Do not touch the surface directly with your hands. This will easily cause scratches on the mirror surface. If there is oil or dust on the mirror surface, it will seriously affect the use of the lens. The lens should be cleaned in time. 2) The use of water on the optical lens is strictly prohibited. , Detergent and other cleaning
This article was published by the original
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist