LXSHOW
Jinan Lingxiu Laser Equipment Co.,Ltd.
The bed adopts a side-hanging structure and a one-piece welded bed, which is annealed to eliminate internal stress. After rough machining, vibration aging is performed before finishing machining, thereby greatly improving the rigidity and stability of the machine tool and ensuring the accuracy of the machine tool. The AC servo motor drive is controlled by the numerical control system, and the chuck realizes reciprocating motion in the Y direction after the motor drives, realizing rapid movement and feeding motion. Both the Y-axis rack and linear guide rail are made of high-precision products, which effectively guarantee the accuracy of the transmission; the limit switches at both ends of the stroke are controlled, and a hard limit device is installed at the same time, which effectively ensures the safety of the machine tool movement; the machine tool is equipped with The automatic lubricating device adds lubricating oil to the moving parts of the bed at regular intervals to ensure that the moving parts run in good condition, which can improve the service life of guide rails, gears and racks.
LX612TNA series pipe cutting machine adopts the chuck moving avoidance method, which can always use two chucks for cutting, and the cutting tail is shorter, and the tail length is ≤50mm; at the same time, it ensures the stability of the cutting process and the consistency of the cutting quality.
There are 2 sets of supporting mechanisms installed on the bed, and there are two types available:
1. The follow-up support is controlled by an independent servo motor to move up and down, mainly to carry out follow-up support for excessive deformation of long cut pipes (pipes with small diameters). When the rear chuck moves to the corresponding position, the auxiliary support can be lowered for avoidance.
2. The variable-diameter wheel support is lifted and lowered by the cylinder, and it can be manually adjusted to different scale positions to support pipes of different sizes.
Axis-Device
The crossbeam of the X-axis device adopts a gantry structure, which is welded by a combination of square tube and steel plate.The gantry component is fixed on the bed, and the X-axis is driven by a servo motor to drive the rack and pinion to realize the reciprocating motion of the slide plate in the X direction. In the process of movement, the limit switch controls the stroke to limit the position to ensure the safety of the system operation.
At the same time, the X/Z axis has its own organ cover to protect the internal structure and achieve better protection and dust removal effects.
The Z-axis device mainly realizes the up and down movement of the laser head.
The Z-axis can be used as a CNC axis to perform its own interpolation movement, and at the same time, it can be linked with the X and Y axes, and can also be switched to follow-up control to meet the needs of different situations.
The chuck is divided into two pneumatic full-stroke chucks, both of which can move in the Y direction. The rear chuck is responsible for clamping and feeding the pipe, and the front chuck is installed at the end of the bed to clamp the material. The front and rear chucks are driven by servo motors to achieve synchronous rotation.
The speed of LX612TNA can reach 150r/min. At a higher speed, the cutting speed can be also greatly improved.
| Model | LX612TNA laser tube cutting machine |
| Power | 1000W-3000W(Optional Power:1-15kw) |
| Cutting speed | Max 0.8s/cut(Depending on material thickness) |
| Machine positioning accuracy | ±0.1mm |
| Maximum speed | 150r/min |
| Maximum acceleration | 1.0G |
| Electricity demand | 380V 50Hz(customizable) |
| Cutting accuracy | ±0.1mm |
| Repeat Positional Accuracy | ±0.01mm/m |
| Working Area | 10-120mm diameter ,6m length tube processing |
INQUIRY ONLINE
Copyright © 2019 Jinan Lingxiu Laser Equipment Co., Ltd. | All rights reserved
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist
