Laser fiber laser cutting machine double laser synchronous pulse sheet metal processing

A dual laser synchronous pulse sheet metal processing automatic fiber laser cutting machine, including a processing table, a clamping arm, a laser arm, a second laser arm, and a laser generator; the upper side of the processing table is equipped with a rectangular through hole, rectangular The upper side of the processing table around the through hole is equipped with a clamping arm constant groove; the clamping arm is placed on the clamping arm constant groove; the upper side of the processing table at one end of the rectangular through hole is equipped with a laser arm track, and the processing table below the laser arm track A second laser arm track is arranged on the appearance; a laser arm is arranged on the laser arm track, and a second laser arm is arranged on the second laser arm track; the laser arm and the second laser arm are divided into two continuous laser generators. Optical fiber of the light outlet. This discovery has the characteristics of high obedience, high processing precision and flat cut surface.

A semi-active automatic fiber laser cutting machine, including placement board, support frame, power supply, second support frame, cutting head, average rod, main body, touch screen, laser , Network slot and support rod, the top right of the main body is provided with a touch screen and is riveted with the touch screen, and the middle end of the main body is provided with a placement plate. This new model has the following beneficial results: After the laser is configured, it can be When the cutting is required, after the thickness sensor detects the size of the object to be cut, the laser amplifier is used to increase the laser energy of the laser generating block, so that the cutting head reaches the result of rapid cutting, and the problem of the slow cutting rate of the equipment is solved. After the configuration of the cooler, after the laser cutting process, the cooler can cool the motor and the power supply, and experience the cooperation with the retarder to reduce the torque of the motor, so that the equipment is quickly connected and stable, and the temperature of the equipment components is reduced. I have dealt with the question that the parts temperature is too high when working part-time.

This article was published by the original