Jinan Lingxiu Laser Equipment Co.,Ltd.
The self-powered console of the automatic fiber laser cutting machine, which includes the left side panel, the right panel, the rear wall threading board group, the front wall panel, the back display cover, the back placement board, the display panel, the top cover, and the configuration On the front wall panel, the keyboard frame, the main frame, the bottom plate and the universal nylon adjusting foot cups arranged in the four corners of the bottom plate, the front wall panel, the left side panel, the right side panel, The bottom plate and the display panel are both continuous with the main frame, and the tops of the left side plate and the right side plate are both equipped with a stainless steel eyebolt. Compared with the bed, this new type of application can be opened independently, and can be constructed with a clear length according to the needs of the customer's site. The placement is convenient, and the placement position is more naive.
The high-precision automatic fiber laser cutting machine includes a computer host. The upper end of the computer host remains unchanged and there is an XY part-time table. The upper end of the XY part-time table remains unchanged and has a shock-absorbing table top. The vibration table has undergone five coil springs and the XY part-time table remains unchanged. The damping table includes two layers of splints, and the two layers of splints experience five coil springs and continuous parts. There is a laser without change, the upper end of the laser does not change with a gas booster valve, the booster end of the gas booster valve continues to help the gas pipeline in the laser, the gas booster valve is electrically connected to the host computer, and the right end of the laser is equipped with a light curtain assembly. The light curtain assembly is equipped with an air pressure inspection sensor, and the lower end of the light curtain assembly is equipped with a placement box. XY part-time station, light curtain assembly, air pressure inspection sensor, keyboard drawer, display and touchpad are all electrically connected to the host computer, host computer and placement box A shock-absorbing rubber sheet is arranged underneath.
This article is published by the original
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist