Global Leadership Brand:Metal Cutting/Marking/Welding/Cleaning

In short, plasma cutting is a method of cutting

by:Lxshow     2020-08-16

If you are thinking of buying plasma cutting equipments, you need to consider certain instructions at first. One of the major and important factors to consider is the thickness of the metal that is needed to be cut. Particularly, plasma cutters are rated on their cutting ability and amperage. And, if you are cutting metal with considerably less thickness, then it is good to use lower amperage plasma cutter.

Similarly, use higher amperage machines for cutting thicker metals. Although, the smaller amperage cutter is capable of cutting metals of any thickness, but the quality will lack in thicker metal cuts. Also, it is important to consider the optimum cutting speed of the machine before purchasing the cutter. Remember, that a machine with high amperage would cut the metal much more easily and faster than one with low amperage.

Moreover, in plasma cutters , pilot arc conducts high frequency electricity through the air. As this electricity interferes with the computers or some other equipments. So it is always considered wise to select lift arc method, because it reduces the problem of high frequency starting circuits. In addition, plasma cutting torches include several plasma cutting consumables that often require certain substitutes. Also, make sure to select a machine which is less consumable, as it would be cost effective and long lasting.

It is also good to make some test cuts with many equipments and make sure to check the quality of each cut before buying plasma cutter. Look for a cutter that offers a tight focused arc. Another thing that you can check is how far you can move and at the same time maintains an arc while lifting the plasma torch during cutting. A plasma cutter that provides a quick, positive transfer from the pilot to the cutting arc at large transfer height can be the best for getting better support during cutting process.

Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Chat Online inputting...