Jinan Lingxiu Laser Equipment Co.,Ltd.
An automatic fiber laser cutting machine impurity filter assembly, including a laser body and a tight oil-water filter. The outer side of the laser body is wrapped with a dust cover, and the laser body is equipped with a focusing mirror. The bottom of the laser body It is equipped with a fiber transmitter, and the fiber transmitters experience fiber line phase continuity. The laser body is equipped with a mirror cavity, and an inlet is arranged above the mirror cavity, and a cavity is arranged above the inlet, and the cavity There is a second chamber inside, each side of the second chamber is provided with a composite filter element, and the bottom of the second chamber is provided with a filter layer, the outside of the tight oil-water filter is provided with an air inlet, and the air There is an air collecting pan between the mouth and the tight oil-water filter. This new type of experience is integrated with a set of tight oil-water filters at the high-purity nitrogen interface of the laser mirror cavity, which effectively prevents dust and water vapor from entering the mirror cavity and causing the destruction of the automatic fiber laser cutting machine.
A discharging mechanism of an automatic fiber laser cutting machine, which is arranged on the dual part-time table of the automatic fiber laser cutting machine. The discharging mechanism includes a splicer and a limiter. Switch, the receiving car includes the receiving car and the second receiving car. The receiving car is placed under the part-time station, and the second receiving car is placed under the second part-time station; The two-sided division is continuous with the sliding of the two-side ends of the frame; the length of the receiving car is the length of the part-time station, and the length of the second receiving car is the length of the second part-time station; the limit switch is placed at the rear of the frame The limit switch is close to the second part-time station, and the limit switch is connected to the electrical cabinet of the automatic fiber laser cutting machine; the end of the splicing trolley facing the end of the frame is equipped with a handle, and the second splicing trolley faces the end of the frame. One end of the end is provided with a second lifting handle. The new applicable model not only facilitates the picking up of fallen small parts, but also facilitates the collection of materials without taking up space.
This article was published by the original
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist