Jinan Lingxiu Laser Equipment Co.,Ltd.
An improved layout of the part-time field of an automatic fiber laser cutting machine; includes a part-time machine, which includes a water field surface and a workpiece cutting area, and the workpiece cutting area is divided into two sides with a constant base frame; two not There are multiple workpiece support plates side by side between the variable base frames; the two variable base frames are divided and configured with multiple comparison landing assemblies A and multiple comparison landing assemblies B; each group of two comparison landing assemblies A There is a sliding rod, and each lifting assembly B is divided with a constant part for clamping the edge of the workpiece; the outer side of the two constant base frames is divided with a continuous line guide; the cutting area of u200bu200bthe winding workpiece on the water field is symmetrically arranged There are multiple rolling balls; Result: The new type is suitable for adding invariant parts that are effective to clamp the incoming workpiece. The incoming workpiece has good invariance and no offset, so that the workpiece cutting accuracy is high, and the new addition is suitable for this Rolling balls and sliding rods save time and effort for high and low materials, and furthermore, the new model has strong applicability.
A low-inertia, high-rigidity laser cutting machine layout model, including: trapezoidal support 1, traveling beam 2, vertical cutting part 3, bed 4. The important layout feature is that the trapezoidal support 1 and the bed 4 are located on both sides, divided by the sliders at both ends of the traveling beam 2, and the upper guide rail of the trapezoidal support 1 and the guide rail on the bed continue to create a moving pair, which can move along the X axis, vertical The cutting part 3 and the traveling beam 2 are continuous and can move along the length deflection, that is, the Y-axis deviation on the traveling beam 2, and the cutting head can move up and down along the vertical part 3.
An automatic fiber laser cutting machine with improved layout; including main control assembly, part-time machine, linear guide, beam assembly, lateral movement assembly, height lifting assembly and laser cutting The part-time machine includes a workpiece cutting area A and a workpiece cutting area B located in the middle. The two sides of the workpiece cutting area A and the workpiece cutting area B are divided into a constant base frame, and the two constant base frames can be divided into two sides. The destructive side-by-side invariant has multiple workpiece support plates, and the two invariable base frames are divided and symmetrically configured with multiple comparison lifting assemblies, and each group of two comparison lifting assemblies is divided and there is a rollable sliding rod; part-time platform The winding workpiece cutting area A and the workpiece cutting area B are symmetrically equipped with multiple rolling balls; the result: this new type can recycle the workpieces assembled on the workpiece cutting area A and the workpiece cutting area B to process the incoming materials, so that the part-time job is not interrupted. The processing obedience is high, and because of the new type of application, rolling balls and sliding rods are added, so that high and low materials save time and effort.
This article was published by the original
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist