Dust removal and smoke exhaust device of automatic fiber laser cutting machine

by:Lxshow     2021-05-25

A full-automatic fiber laser cutting machine dust removal and smoke exhaust assembly, including a rack and a waste network assembly, where the waste network assembly includes a pair of waste guide components, one side of the waste guide component is connected to the rack, The waste guide assembly includes a base and a material guide plate slack punching mechanism, one side of the base is connected to the frame; the material guide plate is arranged on the top of the base, and the material guide plate and the base slide together; the buffer mechanism is arranged on the material guide plate and the base In between, the guide plate is connected to the base through a buffer mechanism. The full-automatic fiber laser cutting machine supplied by this discovery is equipped with a dust-removing and smoke-exhausting assembly, because it is equipped with a waste guide component, so it can reduce the rate of waste landing and reduce the noise caused by waste falling.

A cycle cooling system for automatic fiber laser cutting machine, including water chiller, laser cooling water circuit and cutting head cooling water circuit, the laser cooling water circuit includes sequential continuous water outlet pipes , Filter, first continuous connection pipe, laser water cooling plate and return pipe, the outlet pipe is continuous with one outlet of the chiller, the return pipe continues with the chiller, and the cutting head cooling water path includes the continuous second outlet pipe and second The filter, the second continuous water pipe, the water-cooling plate of the cutting head and the second return pipe. The second outlet pipe is continuous with the other outlet of the chiller, and the second return pipe is continuous with the chiller. The filter contains cleaning components. The components can clean out the impurities deposited on the filter cartridge of the filter. Therefore, the recycle cooling system for the fully automatic fiber laser cutting machine supplied by this discovery can slow down the time that the impurities block the filter holes of the filter cartridge, thereby reducing the filtration. The change frequency of the core tube has lowered the cost.

This article was published by the original

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...