Jinan Lingxiu Laser Equipment Co.,Ltd.
A cutting console of a fully automatic fiber laser cutting machine, including a base, the top of the base undergoes bolts to continue to have a box, and the top of the box undergoes bolts to continue to cut the box, and the cutting of the box There is a motor on one side through the bolt, and the inner wall of the cutting box body through the bolt continues to have two bearing bases that spread to the car on the central axis of the cutting box body. In this new model, it is equipped with hydraulic cylinders, second motors, and motors. The cutting objects are arranged on the support block. The hydraulic cylinder adjusts the height. At the same time, the second motor undergoes gear mobilization and rolling shaft rolling, and the rolling shaft undergoes forward rack mobilization. The cutting table is moved, and the motor undergoes the movement of the ribbed rod mobilization sliding block, thereby mobilizing the laser generator to move, which can cut the cutting objects, reducing the moving range of the laser generator, and avoiding the long-time part-time work of the laser generator. Concise and convenient.
A fully automatic fiber laser cutting machine with dust removal function, including a base, the top of the base is provided with a rectangular groove, and the outer wall of the rectangular groove on both sides of the top is welded with an arrangement rod , The double-sided inner wall of the rectangular groove undergoes bearing rolling and continues to have a screw rod, and the circumferential outer wall of the screw rod experiences a rib sleeve with a push plate, the top double-sided outer wall of the base experiences a bolt and continues to have a supporting plate, and the two sliding Sliding grooves are provided on the outer wall of the comparison side of the board, and the inner walls of both ends of the two sliding grooves both experience bearing rolling and continuously have ribs. In this new type of application, a filter is equipped to filter the dust sucked into the atmosphere to prevent squeezing and contamination. It is equipped with a vibration motor to shake off the dust on the filter to the dust hopper. Perhaps the establishment of a network for dust has reduced the number of part-time employees, and spared the filter blockage from affecting the dust filtration in the atmosphere.
This article was published by the original
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist