loading

Compression structure of automatic fiber laser cutting machine

by:Lxshow     2021-05-18

Newly revealed the compact layout of the automatic fiber laser cutting machine, including the rack. There are two slide rails arranged in parallel in the rack. Two slides are arranged between the two slides, each slide The division of the two ends and the sliding of one of the slide rails continue. There is at least one air cylinder on each slide table, and the piston rod of each cylinder remains unchanged, which is effective for pressing the substrate to be cut on the slide table. Block; After adopting the above-mentioned layout, the slide table in the compact layout can move along the slide rail. In this way, after the slide table moves on the slide rail, the distance between the two slide tables can be changed. In this way, the pressing block can complete the pressing of the substrates to be cut of different sizes.

Newly disclosed automatic fiber laser cutting machine guide rail guard layout, including the guide rail arranged in the rack and the sliding table slidably and continuously on the guide rail, and the end of the sliding table There is a continuous block. The outer cover of the guide rail is equipped with a protective cover. The protective cover and the guide rail remain unchanged. The end of the continuous block extends into the protective cover and does not change. The sliding block and the guide rail continue to slide. The continuous block It is equipped with a groove for the side wall of the protective cover to be embedded, and there is a gap between the groove and the side wall of the protective cover; this is a new type of experience to install the protective cover outside the guide rail, so that you can avoid the slider and the guide rail. The signs of pinching the hands of part-time employees can effectively avoid the dust that occurs during the part-time process of the automatic fiber laser cutting machine from falling on the guide rails, thereby effectively avoiding the wear of the guide rails and sliders.

The automatic fiber laser cutting machine for cutting the position, including a part-time table, the bottom of the part-time table is welded with a foot, and the end surface of the part-time table is unchanged A loading platform, the left side of the loading platform and the end face of the part-time platform are not provided with a marble beam, one side wall of the marble beam is always provided with a control panel, and the end of the marble beam is not The variable is equipped with a drive motor, the drive motor remains unchanged on the end of the marble beam after the drive motor is unchanged, and the drive end of the drive motor remains unchanged and continuously tightens the ball screw, and the tight ball screw runs through the drive motor There is a constant block of the screw rod on the right side of the constant frame and the constant frame of the drive motor, and there is a constant block on the end of the tight ball screw apart from the drive motor. This new type of experience configuration can accurately perform laser cutting tasks.

Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...