Jinan Lingxiu Laser Equipment Co.,Ltd.
Swarf removal positioner for automatic fiber laser cutting machine for metal pipes, which includes a mounting plate, a positioning plate, a plug, a chip removal tube and a drive assembly; the mounting plate is L-shaped, and one side is mounted on the On the metal pipe automatic fiber laser cutting machine, the other side is arranged on the positioning plate; the positioning plate does not change the plug and the drive assembly into one, so that it can act synchronously with the positioning plate; A comprehension hole corresponding to the metal pipe is opened on the side of the head toward the metal pipe, and the diameter of the comprehension hole is smaller than the inner diameter of the metal pipe to be cut; the outer diameter of the chip removal tube is smaller than the comprehension hole The diameter, one end of which passes through the comprehension hole, and the other end is connected to the driving assembly, and can move around in the comprehension hole under the driving of the driving assembly. The method of blocking is to avoid metal debris from entering the pipe during the laser cutting process, and then to prevent the metal debris from adhering to the inner wall of the cut metal pipe.
The iron core automatic fiber laser cutting machine includes a base. The four corners of the bottom of the base are fixed with supporting legs, and the appearance of the base is fixed with supporting plates on both sides. There is a horizontal plate at the top of the support board, and an electric telescopic rod is placed at the center of the appearance under the horizontal plate. The lower end of the electric telescopic rod is unchanged with an automatic fiber laser cutting machine body, and the lower end of the automatic fiber laser cutting machine body is fixed at the middle of the body. There is a laser cutting head, a drive box is fixed on the base, a motor is placed at the center of the inner wall of the drive box, a bearing is placed at the center of the other side of the drive box, and the appearance of the moving block is unchanged. The work piece groove plate is installed on the continuous board, and the work piece groove plate and the main body of the automatic fiber laser cutting machine are not fixed with infrared beam assembly. The iron core automatic fiber laser cutting machine part-time obeys the adjustment of high and low materials, which is convenient and has strong applicability.
Copyright © 2019 Jinan Lingxiu Laser Equipment Co., Ltd. | All rights reserved
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist