Jinan Lingxiu Laser Equipment Co.,Ltd.
The automatic fiber laser cutting machine assists the reclaiming assembly, including the frame and the reclaiming mechanism arranged in the frame, and the reclaiming assembly formed by the continuous structure of the frame and the reclaiming mechanism is adopted in the layout. The layout is simple and The results of the use are good. The layout of the reclaiming assembly including the magnet and the ejector rod on the magnet and the behavior sleeve continues to respond, because the plate that undergoes laser cutting is mostly a metal part, so it does not require manual labor to suck up the workpiece through the magnet. Fasteners, on the one hand, are promoted to part-time obedience, on the other hand, they also protect the original material board from being destroyed by the fastener room, and the lifting frame is an arch bridge-like mechanism. This layout is simple and solid, and after the workpiece is sucked After the upper lifting sleeve, the workpiece can be removed from the attraction of the magnet under the use of external force to reach the goal of part removal. When encountering a large workpiece, the workpiece can be removed by the continuous effort-saving rod, which makes the assembly more convenient in fit. And increase the suitability of the original fit.
The automatic fiber laser cutting machine unloading and transferring assembly includes a frame, a transfer assembly and a discharge assembly. The two sides of the frame are provided with guide rails, and the guide rails are There is a discharging assembly, the discharging assembly can move along the guide rail, a rack is provided under the guide rail, and the discharging assembly can move on the guide rail through meshing with the rack. A transfer assembly is provided under the, one end of the transfer assembly is located under the frame, and the other end extends to the outside of the frame. It is equipped with unloading assembly and transfer assembly, which can unload the cut sheet from the cutting machine, transport it to the transfer assembly, and then move the cut sheet from the bottom of the frame to the outside of the frame through the transfer assembly, which is convenient for materials Sorting, improving part-time obedience.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist