Automatic fiber cutting machine has the advantages of high cutting efficiency

Taiwan group automatic optical fiber cutting machine adheres to the combination of independent development and introduction, digestion and absorption, supports enterprises to independently develop new products, encourages introduction, digestion, absorption and re-innovation, and guides enterprises to gradually shift from relying on imported technology to independent innovation to optical fiber automatic fiber optic cable Laser cutting machine, optical cable, automatic optical fiber laser cutting machine manual, unfold the optical cable wound on the barrel, cut into sections according to the set length and the number of optical cables, and then wind it into a reel. Confirm that the barometer shows pressure. Rotate the adjustment knob on the dual body to adjust the output pressure, so that the pressure gauge shows a stable pressure source cable and insert it into the 220VAC power socket in the workshop. Turn on the power switch, turn on the power switch, and turn on the summary. The automatic optical fiber cutting machine for paper table group is a kind of universal equipment with a very wide range of applications. Almost every printing enterprise must be equipped with a paper fiber laser cutting machine. Occupies an important position in mechanical products. With the progress of society and the development of science, papermaking and printing industries have put forward higher requirements for fiber laser cutting machines. Aiming at the defect that domestic fiber laser cutting machines can only cut in one direction and can only cut fixed-size paper, this article separates the horizontal cutting from the vertical cutting. The installation method of the vertical hob and the cutting time of the horizontal knife are designed as a breakthrough. An optical fiber laser cutting machine that can cut the yarn in both directions, and can cut variable-size paper according to the requirements of the business.

Taiwan group automatic optical fiber cutting machine is used for cutting trademarks, business cards and famous kinds of printed products. The fiber laser cutting machine has the advantages of simple structure, simple and fast action, and the complete working process is controlled by PLC. It has the advantages of high cutting quality and high production efficiency. The whole design process demonstrated in detail the feasibility of the principle scheme and the rationality of the mechanism. The structure design was all made with advanced software modeling and assembly, which truly demonstrated the structure size and working principle of the entire system. In the design process, through the design of actual application products, the mastery of the professional knowledge has been enhanced, the understanding of design ideas and the practical application ability have been improved, and the ability to complete design tasks independently has been cultivated, and the rigor has been recognized The work attitude plays an important role in designing product quality. Of course, in this design, there are still some imperfections in the Xu family, which will be used for reference in future designs and gradually improved. Keywords: variable size; two-way shear. Implementation of a fiber laser cutting machine numerical control system based on Labview. Source of the article: It is proposed to develop a fiber laser cutting machine numerical control system based on a PMAC card on the LabVIEW platform. It introduces its hardware structure, working principle and software system design. Fiber laser cutting machine is an important equipment for garment factories to cut cloth in large quantities. It can cut a few centimeters of cloth at a time, with high efficiency. The open CNC system controlled by a computer can improve the cutting precision and increase the utilization rate of the cloth u003d this In the system, the control method of multi-axis motion control board is adopted, and the PMAc motion control board is inserted into the standard slot of the eight PC machine for real-time control, and the PC machine is used as a human-computer interaction interface and system management. Through the modular design method, a unified and reconfigurable system deadlock platform is established, which greatly enhances the flexibility and adaptability of the control system.

The hardware structure of the automatic optical fiber cutting machine for a group of stations. This control system is constructed by plugging in a PC with PMAC, a motion control card and a general I/O card DIO48.

/