Analysis on the use and maintenance technology of automatic fiber laser cutting machine

by:Lxshow     2021-05-24

With the continuous development of office intelligence, the laser automatic fiber laser cutting machine has played an important role in people's work and life. In order to give full play to the functions of the laser automatic fiber laser cutting machine, we should use it And maintenance technology to pay enough attention. Therefore, the author first discusses the common faults and countermeasures of the laser automatic fiber laser cutting machine, and then discusses the maintenance technology of the laser automatic fiber laser cutting machine, hoping to maintain the use of the agency automatic fiber laser cutting machine Performance, so that it provides enough help for our work.

Laser full-automatic fiber laser cutting machine With the continuous development of office intelligence, laser full-automatic fiber laser cutting machine has played an important role in people’s work and life. The function of the automatic fiber laser cutting machine, we should pay enough attention to its use and maintenance technology, it has been widely popularized in the past years, and because of its high quality and fast speed, it has gradually replaced the traditional automatic fiber laser cutting In order to make better use of its excellent performance, the author hereby discusses its use and maintenance in detail.

Common faults and countermeasures of laser automatic fiber laser cutting machine

1 Cutting machine garbled codes and solutions

There are two main reasons for cutting machine garbled codes There are electromagnetic interferences on the computer or incorrect installation of the cutting machine driver. The simplest solution is to turn off the automatic fiber laser cutting machine, uninstall the original automatic fiber laser cutting machine driver, and then unplug the automatic fiber laser cutting machine. Machine data cable, turn off the computer and disconnect the power, after about five minutes, reconnect the data cable, turn on the power to turn on the automatic fiber laser cutting machine and computer, reinstall the automatic fiber laser cutting machine driver in the computer, it can be solved The cutting machine is faulty with garbled characters. If the above method does not work, you need to consider replacing the main board of the automatic fiber laser cutting machine.

The effect of the cutting machine is poor and the countermeasures

After the automatic fiber laser cutting machine is used for a long time, there will be faults such as the bottom gray, black edges, and black spots of the cutting machine. This kind of failure is mostly caused by the toner cartridge, you can replace the toner cartridge and re-cutting machine. If you can’t solve the problem after replacing the toner cartridge, you can remove the toner cartridge and use a blower to clean the cavity of the automatic fiber laser cutting machine. On this basis, use a cotton ball moistened with absolute alcohol to rub paper in the cavity of the automatic fiber laser cutting machine. Clean the wheels, electrode wires and metal contacts. After drying, reinstall the toner cartridge and retest the cutting machine. If the fault still cannot be solved, you need to return to the factory for repair. Consider replacing the fixing assembly, laser or repairing the high-voltage circuit inside the automatic fiber laser cutting machine.

There are three main situations in which the cutting machine cannot be cut, and we will describe them separately below:

The power indicator of the automatic fiber laser cutting machine is not bright but the cutting machine cannot be cut

Check the power plug of the laser automatic fiber laser cutting machine to confirm whether the contact is good. You can consider replacing the power cord. If the above methods do not restore the automatic fiber laser cutting machine power, you can consider using a multimeter to control the automatic The end of the power cord of the fiber laser cutting machine is tested. If the test result is normal, the cause of the failure is that the internal motherboard or power lamp components of the automatic fiber laser cutting machine are damaged, and the parts need to be replaced to solve the failure;

The power indicator of the automatic fiber laser cutting machine is normal but the cutting machine is not working

The reason for this failure is mostly caused by the driver error. The solution is to uninstall and reinstall the driver. , You can download it from the official website of the manufacturer of the automatic fiber laser cutting machine or use the attached CD to install the driver. If the above method does not work, you can consider replacing the cutting machine data cable. If the cutting machine still fails, it can be determined that the fault is caused by a computer problem. Most of the reasons are problems with the computer operating system. Reinstall the operating system to solve it. If none of the above methods work, only replace the motherboard to solve the problem.

The warning light of the automatic fiber laser cutting machine is on and the machine cannot be cut

When this happens, you should cut off the power and restart the automatic fiber laser cutting machine. If you hear 'buzzing 'The mechanical sound of the automatic fiber laser cutting machine shows that there is basically no paper jam problem inside the automatic fiber laser cutting machine. It may be caused by the absence of paper in the automatic fiber laser cutting machine carton. Therefore, the automatic fiber laser cutting machine carton Check, if there is paper in the carton, you need to check whether the toner cartridge is in good contact, and if it is indeed a problem with the toner cartridge, you need to reinstall the toner cartridge. Another situation is that the automatic fiber laser cutting machine is turned on but the 'buzzing' mechanical rotation sound is not heard, which indicates that the automatic fiber laser cutting machine has the impression of a paper jam, and the problem can be solved by clearing the paper jam. .

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...