Advantages of laser cutting in processing

1. High accuracy: positioning accuracy is 0.05mm, repeat positioning accuracy is 0.02 mm2. Narrow slit: The laser beam is focused into a small spot, so that the focal point reaches a high power density, the material is quickly heated to the degree of vaporization, and evaporates to form a hole. As the beam and the material move relatively linearly, the holes continuously form slits with a very narrow width. The width of the incision is generally 0.10～0.20mm. 3. Smooth cutting surface: There is no burr on the cutting surface, and the surface roughness of the incision is generally controlled within Ra12.5. 4. Fast speed: The cutting speed can reach 10m/min, and the maximum positioning speed can reach 70m/min, which is much faster than the wire cutting speed. 5. Good cutting quality: non-contact cutting, the cutting edge is little affected by heat, and there is basically no thermal deformation of the workpiece, completely avoiding the collapse of the material when the material is punched, and the cutting seam generally does not require secondary processing. 6. No damage to the workpiece: The laser cutting machine will not contact the surface of the material to ensure that the workpiece is not scratched. 7. Not affected by the hardness of the material being cut: The laser can process steel plates, stainless steel, aluminum alloy plates, hard alloys, etc., no matter what the hardness, it can be cut without deformation. 8. Not affected by the shape of the workpiece: laser processing is flexible and can be processed at will