loading
Home  >   > 

How to detect the air tightness of fiber laser cutting machine

How to detect the air tightness of fiber laser cutting machine

2020-08-13

news-Lxshow-img

The fiber laser cutting machine is assembled with air tightness active inspection. The frame and the pipe are equipped with symmetrically diffused invariable plates on both sides of the bottom of the frame. The pipe is arranged between the two invariable plates, and the invariable plate is different from the pipe One side is equipped with a blocking mechanism, the side of the non-changing plate facing the pipe is equipped with a clamping mechanism, the bottom end of the pipe is equipped with a feeding mechanism, the lower end of the feeding mechanism is equipped with a lifting mechanism, and the non-changing plate faces one end side wall of the pipe A promotion mechanism is installed to complete the automated feeding of the pipes and the feeding is stable, and the air tightness inspection of the pipes is carried out before the laser cutting process, which guarantees the product quality, the layout plan is simple and reasonable, the production difficulty is small, and the cost is low , Applicable to promote applications.

The tube material bracket mechanism of the laser fiber cutting machine, the base, the reducing wheel, the setting seat and the adjusting pin, the base is unchanged with a dual-axis cylinder, and the dual-axis cylinder is unchanged with a bottom plate. The side plates are not changed, the upper ends of the side plates are all provided with clamping grooves, the grooves are not provided with bearings, and the side plate on one side is not changed with pressing blocks. Favorable result: The diameter reducing wheel can be used to support the pipe material to prevent the pipe from bending and deforming under the influence of its own weight. Under the environment where the height of the reducing wheel rises unchanged, the reducing wheel can be rolled to support the arc of the pipe material The height of the center of the tube will not change, only the radius of the arc, so it can continuously ensure that the tube is connected to the front and rear chucks on the main bed in the pipe cutting machine, so that the tube material will not shake when cutting the tube, so It can guarantee the quality and compliance of the pipe cutting.

 

Tube feeding skills of cnc fiber laser cutting machine, fiber laser cutting machine tube feeding machine, tube feeding machine base, feeding assembly, ejecting assembly, buffering assembly, pushing assembly, stopper assembly and feeding plate; on the first part of the base One side is provided with a pushing component and a feeding plate, and the other side of the base is provided with a feeding component, a topping component and a buffer component. Favorable results obtained: the joint application of feeding components, ejector components, buffer components, pusher components, stopper components and feed plates completes the feeding of pipes, and the pipes fall from the top of the feed plate at certain intervals and then are blocked by the buffer components , The buffer assembly absorbs the kinetic energy of sliding down the interval, and the pipe slides from zero kinetic energy to the stopper assembly on the slope of the feeding plate. The extreme ground reduces the kinetic energy of the pipe slipping onto the stopper assembly, avoiding the pipe and pipe feeding machine. The very big impact of the collision guarantees the normal part-time job of the pipe feeder and extends the application life of the pipe feeder.


Chat Online 编辑模式下无法使用
Leave Your Message inputting...