loading
Home  >   > 

How to clean and maintain the cutting head of fiber laser cutting machine

How to clean and maintain the cutting head of fiber laser cutting machine

2020-01-16

news-Lxshow-img

Fiber laser cutting machineas a new type of cutting machine product, has performed well in recent years. This high-precision laser processing method is far beyond traditional processing methods in terms of efficiency and stability, creating extraordinary value for enterprises. As the core component of the fiber laser cutting machine, the cutting head is a laser output device, which is composed of a nozzle, a focusing lens and a focusing tracking system. In order to ensure the normal operation of the fiber laser cutting machine, cleaning and maintenance of the laser head has become a top priority. The following are the daily cleaning and maintenance steps of the cutting head of the fiber laser cutting machine organized for you:


news-Lxshow-How to clean and maintain the cutting head of fiber laser cutting machine-img
news-How to clean and maintain the cutting head of fiber laser cutting machine-Lxshow-img
news-Lxshow-img-1

Centering screw

The laser can be adjusted at the center point of the nozzle. For the adjustment method, you can paste transparent glue on the position of the light exit of the nozzle, and then press the spot to remove the transparent glue. (If the light is not in the center, the cutting will be unstable and the cutting will have burrs.)

 

Z axis dust cover

After the lower screw is loosened, the Z-axis can be oiled and lubricated.

 

Z axis upper limit action

After turning on the drive, the cutting head limit block will return to the upper limit.

 

Lower limit of Z axis

When the cutting head limit block approaches the lower limit, it will quickly return to the upper limit and return to the set position.

 

Focus screw

Select the appropriate focus position according to the material thickness and the type of cutting gas.

 

Protective mirror drawer

There are protective glasses and seals inside. The protective glasses need to be checked every day before starting and wiped clean. The seals must be replaced every three months.

 

Maintenance instructions:

Use isopropyl alcohol or analytical alcohol to clean the lens. Pay attention to wearing finger cots when holding the lens. Hold both sides of the lens and wipe from side to side with a cotton swab.

 

Tips:

The cutting head sealing ring is lost, which will cause cutting instability during cutting, the cutting head capacitance value will change greatly, and it will not work in severe cases.


Chat Online 编辑模式下无法使用
Leave Your Message inputting...