Jinan Lingxiu Laser Equipment Co.,Ltd.
The protective fence assembly of the automatic fiber laser cutting machine includes a plate frame and a second plate frame. The outer two ends of the plate frame and the outer two ends of the second plate frame are both welded with rib seats, and the front of the rib seat is close to There is a heel plate, the inner sides of the heel plate are provided with rib holes, the inner rib of the rib hole continues to have a rib knob, and the rib at the other end of the rib knob continues to the inner side of the rib seat. Both the inner side and the inner side of the second plate frame are welded with anti-falling rings, one side of the anti-falling ring is closely attached to a glass frame, the inner side of the glass frame is embedded with transparent tempered glass, and both ends of the outer side of the glass frame are provided There are slots. The guard rail assembly of the automatic fiber laser cutting machine facilitates the assembly of two plate frames and side panels with each other. At the same time, the transparent tempered glass for peeking is also easy to destroy, so that the transparent tempered glass can be easily purchased and placed.
In more detail, the automatic fiber laser cutting machine is a kind of automatic fiber laser cutting machine nozzle active flushing assembly, which can undergo constant cleaning and assembly of the automatic fiber laser cutting machine nozzle. Moreover, the nozzle of the automatic fiber laser cutting machine can be of the same different specifications; the outer wall of the nozzle of the automatic fiber laser cutting machine can be cleaned without dead angles after the constant clean assembly; the water can be filtered and washed by the filter rod; the automatic fiber laser cutting machine can be subjected to the water spray assembly The nozzle performs water flow cleaning. During the flushing process, the water cycle can be used to save water resources. It includes constant clean assembly, sewage network assembly, filter rod, mid-end connecting rod, connecting pipe, water spray assembly and speed control assembly. When the inner end of the spherical flushing rod touches the outer wall of the nozzle of the automatic fiber laser cutting machine, the spherical flushing rod pushes the flushing piston to the outside, causing the flushing piston to be contracted. After the flushing piston touches the outer wall of the nozzle of the automatic fiber laser cutting machine, the flushing piston is experienced Increase the contact area with the outer wall of the nozzle of the automatic fiber laser cutting machine to prevent dead ends during the cleaning process.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist